|
Product Details:
|
| Max Cable Distance: | 80km | Wavelength: | DWDM C-Band C17-C61 |
|---|---|---|---|
| Rate: | 10Gb/s | Connector: | LC Duplex |
| Optical Component: | EML/APD | Compatible: | Cisco, HP, Alcatel Lucent, Juniper, Brocade Or Customized |
| High Light: | fiber optic module,fiber transceiver module |
||
Cisco HP Fiber Optic Transceiver 10G SFP+ C Band DWDM C17-C61 80KM LC Duplex
Description
Cisco HP Compatible 10G SFP+ C-Band DWDM C17-C61 80KM Fiber Optic Transceiver manufactured by ANC International Co., Limited is an enhanced small form factor pluggable (SFP+) fiber optic transceiver with digital diagnostics monitoring functionality (DDM). Supporting Ethernet and Fiber Channel standards with dense wavelength division multiplexing (DWDM) wavelength makes it ideally suited for high capacity data-com and storage area network applications. DDM functionality (alarm and warning features) is integrated into the design via an I2C serial interface per the Multi-Source Agreement (MSA) SFF-8472, Rev. 11.3.
Features
Supports 9.95 to 11.3 Gb/s
Duplex LC Connector
Hot-pluggable SFP footprint
Cooled 1550nm EML laser
RoHS Compliant and Lead Free
Up to 80KM link length
100GHz channel spacing
Built-in dual CDR
Power dissipation <2.0W (0~70℃), <2.3W(0~85℃), <2.3W(-40~85℃)
Commercial and industrial operating temperature optional
SFP MSA SFF-8472 SFF-8431 SFF-8432 Compliant
Applications
DWDM 80km point to point link
Fiber Channel 10G
10G Ethernet
ITU-T G.698.1 DS100S1-2Dz
Optical Characteristics (TOP=25°C, Vcc=3.3 Volts)
| Parameter | Symbol | Min | Typ | Max | Unit | Ref. |
| Transmitter | ||||||
| Output Opt. Power | PO | -1 | 4 | dBm | ||
| Optical Wavelength | λ | As per ITU-T 694.1 | nm | |||
| Side-Mode Suppression Ratio | SMSR | 30 | dB | |||
| RMS Spectral Width(-20dB) | σ | 1 | nm | |||
| Optical Extinction Ratio | ER | 9 | dB | |||
| Tx Jitter(SONET)20KHZ-80MHZ | Txj1 | 0.3 | UI | 3 | ||
| Tx Jitter(SONET)4MHZ-80MHZ | TXj2 | 0.1 | UI | 3 | ||
| Path penalty at 1600ps/nm@9.95Gb/s | 3 | dB | ||||
| Relative Intensity Noise | RIN | -128 | dB/Hz | |||
| Center Wavelength | λc EOL | z-100 | z | Z+100 | pm | |
| Receiver | ||||||
| RX Sensitivity @10.3 Gb/s | SENS | -24 | dBm | 1,2 | ||
| Receiver Overload | -7 | dBm | ||||
| Optical Center Wavelength | λC | 1260 | 1600 | nm | ||
| LOS De-Assert | LOSD | -28 | dBm | |||
| LOS Assert | LOSA | -37 | dBm | |||
| LOS Hysteresis | 0.5 | dB | ||||
Notes:
1. Measured with conformance signals defined in FC-PI-2 Rev. 10.0 specifications.
2. Measured with PRBS 231-1 at 10-12 BER.
3. GR-253-CORE Issue 4.
4. With optical input power at the receiver between -7 ~ -18dBm
Contact Person: Ms. Cherry Liu
Tel: 86-13798591226
Fax: 86-755-29407103
