|Fiber Type:||G657A1 Or G657A2 Or Customized||Fiber Count:||Simplex Or Customized|
|Cable Jacket:||Black Or White Color LSZH||Cable Diameter:||2x3mm For Indoor; 2x5mm For Outdoor|
|Insertion Loss:||≤0.3dB||Length:||10m, 20m, 25m, 30m, 50m Or Customized|
Pre Terminated Fiber Optic Patch Leads,
Simplex Fiber Optic Patch Leads,
Pull Leg FTTH Drop Cable
Pre-terminated FTTH Drop Cable with Paper Spool and Pull Leg in Various Length
Pre-terminated FTTH Drop Cable with Paper Spool and Pull Leg manufactured by ANC International Co., Limited has customized SC, SC/APC, LC/PC, FC/PC etc connectors on both ends. The length of the FTTH drop cable is 20m, 25m, 30m, 50m, 70m, 100m or other customized length. This FTTH drop cable has pull leg on the open end of the cable, thus cable can easily be pull out during installation without damage of connector or cable.
Fibre to the home (FTTH) is the installation and use of optical fibre to provide high-speed broadband access to individual buildings such as businesses or single-family units (SFUs) which are freestanding residential buildings, or multidwelling units (MDUs) such as apartment buildings. Before deploying a FTTH network, providers must first decide whether to use a splice, which is a permanent joint, or a connector, which can be easily mated and un-mated by hand.
This is for both ends of the drop cable – the distribution point and at the home’s optical network terminal (ONT) or network interface device (NID). Both splices and connectors are widely used at the distribution point. At the ONT/NID, either a field terminated connector or a spliced-on factory-terminated connector can be used.
Two parallel FRP strength members ensure good performance of anti-electromagnetic and crush resistance
Small Size (mm): 3.0*2.0 (1-2cores indoor) for indoor; 5.0x 2.0mm for outdoor ;
Bending loss (Bare Fiber) Radius: 7.5mm x 1 turn dB ≤0.5 at 1550nm
Novel flute design, easily strip and splice, simple installation and maintenance
Low smoke, zero halogen or flame retardant sheath
High return loss;
Low insertion loss;
1. LAN, WAN and Metro Networks
2. FTTH project & FTTX Deployments
3. CATV System
4. GPON, EPON
5. Fiber Optic Test Equipment
6. Data-base Transmit Broadband Net
Construction of Optical Fiber Cable
|No. of fiber||simplex or duplex|
|Fiber model no.||Single mode: G.657A|
|Outer diameter of colour coating||250±15um|
|Dielectric strength member||FRP|
|Colour of Jacket||White or black|
|No. of fibers||Approx. Cable outer diameter||Approx. weight of cable Kg/KM||
Minimum bending radius MM
|No Load||Under Load|
|Insertion Loss (IL)||dB||≤0.2 (typical); ≤0.3 (maximum)|
|Return Loss (RL)||dB||UPC≥50/APC≥60 typical|
|Operating Wavelength||nm||1310 & 1550|
Indoor Drop Cable Structure
Outdoor Drop Cable Structure
1. Are you factory direct?
as a professional Cable manufacturer, specialized in Fiber Optic Patch Cord, Fiber Optic PLC Splitter. Our products are mainly exported to Europe, South America, and some other countries and areas.
2. What is your main products?
Outdoor fiber optic cables indoor fiber optic cables FTTH Drop cables ADSS
Indoor armored patch cords fiber cable Optical patch cords Sc LC FC ST MTP MPO optical patch cord
3. Product quality guarantee period?
20 years Guarantee for fiber optic cable
4. Do you have certificate for raw material?
We build long-term relationship cooperation with qualified ISO9001 ROHS raw material suppliers
Contact Person: cherry