|
Product Details:
|
| Fiber Type: | G657A1 Or G657A2 Or Customized | Fiber Count: | Simplex Or Customized |
|---|---|---|---|
| Cable Jacket: | Black Or White Color LSZH | Cable Diameter: | 2x3mm For Indoor; 2x5mm For Outdoor |
| Strength Member: | KFRP Or FRP Or Steel Wire | Insertion Loss: | ≤0.3dB |
| Length: | 10m, 20m, 25m, 30m, 50m Or Customized | Packing: | Paper Spool Or Customized |
| High Light: | optical patch cord,fiber optic jumper |
||
Pre-terminated FTTH Drop Cable with Paper Spool and Pull Leg in Various Length
Description
Pre-terminated FTTH Drop Cable with Paper Spool and Pull Leg manufactured by ANC International Co., Limited has customized SC, SC/APC, LC/PC, FC/PC etc connectors on both ends. The length of the FTTH drop cable is 20m, 25m, 30m, 50m, 70m, 100m or other customized length. This FTTH drop cable has pull leg on the open end of the cable, thus cable can easily be pull out during installation without damage of connector or cable. Fibre to the home (FTTH) is the installation and use of optical fibre to provide high-speed broadband access to individual buildings such as businesses or single-family units (SFUs) which are freestanding residential buildings, or multidwelling units (MDUs) such as apartment buildings. Before deploying a FTTH network, providers must first decide whether to use a splice, which is a permanent joint, or a connector, which can be easily mated and un-mated by hand. This is for both ends of the drop cable – the distribution point and at the home’s optical network terminal (ONT) or network interface device (NID). Both splices and connectors are widely used at the distribution point. At the ONT/NID, either a field terminated connector or a spliced-on factory-terminated connector can be used.
The FTTH drop cable has two parallel Fiber Reinforce Plastic (FRP) strength members placed at the two sides and the 250um bare optical fibers are positioned in the center. This drop patch cord can be easily stripped and spliced, it can be simple installed and maintained. The cable is jacketed with black or white color LSZH sheath.
FTTH drop patch cord can be directly connected to the homes. It is suitable for connecting with communication equipment, and used as access building cable in premises distribution system.
Specification
Two parallel FRP strength members ensure good performance of anti-electromagnetic and crush resistance
Small Size (mm): 3.0*2.0 (1-2cores indoor) for indoor; 5.0x 2.0mm for outdoor ;
Bending loss (Bare Fiber) Radius: 7.5mm x 1 turn dB ≤0.5 at 1550nm
Novel flute design, easily strip and splice, simple installation and maintenance
Low smoke, zero halogen or flame retardant sheath
Low cost;
High return loss;
Low insertion loss;
Usage
FTTH access network.
Telecommunication Networks
CATV Networks
Data communications Networks
Local Area Networks
Technical Data
Construction of Optical Fiber Cable
| Items | Description |
| No. of fiber | simplex or duplex |
| Fiber model no. | Single mode: G.657A |
| Fiber colour | blue/orange |
| Outer diameter of colour coating | 250±15um |
| Dielectric strength member | FRP |
| Jacket | LSZH |
| Colour of Jacket | White or black |
| No. of fibers | Approx. Cable outer diameter | Approx. weight of cable Kg/KM |
Minimum bending radius MM
|
|
| No Load | Under Load | |||
| 1~2 | 3.1x2.0mm | 10.0 | 10 | 20 |
Parameter for single mode pre-terminated FTTH drop patch cord
| Characteristics | Unit | Value/Performance |
| Insertion Loss (IL) | dB | ≤0.2 (typical); ≤0.3 (maximum) |
| Return Loss (RL) | dB | UPC≥50/APC≥60 typical |
| Operating Wavelength | nm | 1310 & 1550 |
| Mating | ≥500 times | |
| Tensile | N | 100 |
| RoHS Compliant | Yes | |
| Operating Temperature | ℃ | -20~+80 |
Indoor Drop Cable Structure
Outdoor Drop Cable Structure
Related Picture
Contact Person: Ms. Cherry Liu
Tel: 86-13798591226
Fax: 86-755-29407103
