|
Product Details:
|
| Connector A: | 12F Senko MPO Female Or Customized | Connector B: | 12F Senko MPO Female Or Customized |
|---|---|---|---|
| Fiber Mode: | OM5 50/125 Or Customized | Fiber Core: | 12F, 24F Optional |
| Length: | 1m, 2m, 5m, Or Customized | Cable: | LSZH 3.0mm Jacket, Lime Green |
| High Light: | 24F MPO Fiber Optic Cable,12F MPO Fiber Optic Cable,12F mpo 24 fiber cable |
||
12F 24F MPO Fiber Optic Cable Assemblies OM5 50/125 Type B
Description:
12 Fiber OM5 50/125 MPO to MPO Fiber Optic Cable Assemblies Type B manufactured by ANC International Co., Limited is used to make connection between 2pcs 100G QSFP28 SR4 optical transceiver module. OM5 Multimode 50/125 Fiber Patch Cord is a wideband multimode fiber (WBMMF) solution that supports at least four wavelengths in the 850-950 nm range. It is used particularly in 10, 40 and 100 Gb/s applications, where the transmission distances and higher bandwidth requirements have dictated a need for a higher performance but cost-effective multimode system. It can transmit at 850nm wavelength up to 400m on the rate of 40 Gb/s or up to 150m on the rate of 100 Gb/s.
This OM5 MPO-MPO fiber patch cord terminates 12F Senko MPO female connector on both ends of 3.0mm diameter lime green round cable.
The MPO Fiber Optic Cable Assemblies are ideal product for data center. ANC MPO connectors are fully compatible with US Conec MTP products.
Features:
100% Interferemeter Pass
SM G657A1, OM1, OM2, OM3, OM4, OM5 optical fiber cable optional;
Female and Male connectors optional
12Fiber, 24Fiber MPO MTP Connectors optional;
Standard Loss and Low Loss optional
Cable can be 3.0mm round single jacket or 4.5mm double layer;
Applications:
Data Center
FTTx
Optical transmission network;
Optical Performance:
| MPO/MTP | SM Standard | SM Low Loss | MM Standard | MM Low Loss | |
| Insertion Loss | Typical | 0.35dB | 0.20dB | 0.35dB | 0.20dB |
| Max | 0.75dB | 0.35dB | 0.65dB | 0.35dB | |
| Return Loss | APC≧50dB | ≧25dB | ≧35dB | ||
| PC≧40dB | |||||
| Durability | ≤0.3dB (change 500matings) | ≤0.3dB (change 1000matings) | |||
| Exchangeability | ≤0.3dB (Connector randomly) | ||||
| Tensile Strength | ≤0.3dB (Max 66N) | ||||
| Vibration | ≤0.3dB (10~55Hz) | ||||
| Operation Temperature | -40℃ ~ +75℃ | ||||
Interferemeter Test:
| MPO/MTP | Dimension MT |
| Radius of Curvature | X≧2000mm; Y≧50mm |
| Fiber Height | 1000~4000nm |
| Endface Angle | X±0.3°; Y±0.3° |
| Core Dip | -300nm ~ 300nm |
Choose Your Polarity
Contact Person: cherry
Tel: +8613798591226
