|
Product Details:
|
| Fiber Type: | G657A1 Or G657A2 Or Customized | Fiber Count: | 4 Core |
|---|---|---|---|
| Cable Jacket: | LSZH, White Color | Cable Diameter: | 3mm |
| Connector: | LC/APC Or Customized | Insertion Loss: | ≤0.3dB |
| Length: | 10m, 20m, 25m, 30m, 50m Or Customized | Packing: | Paper Spool Or Customized |
| High Light: | optical patch cord,fiber optic patch cable |
||
4 Core FTTH Fiber Optic Patch Cord in Paper Spool with Small Wall Mount Box
Description
4 Core FTTH Fiber Optic Patch Cord in Paper Spool with Small Wall Mount Box manufactured by ANC International Co., Limited has customized LC/APC, SC/UPC, SC/APC, LC/PC, FC/PC etc connectors with small termination box on one end, and the other end leaves open, without connector for splicing to fiber distribution box or racks. The length of the FTTH fiber optic patch cord can be 20m, 25m, 30m, 50m, 70m, 100m or other customized length. This FTTH cable has a round 3.0mm small jacket, just like regular simplex cable. Inside the jacket, it is high quality aramid yarn, surrounding 4 customized fiber with 600um transparent buffer tube. This cable uses enough aramid yarn and hardern LSZH jacket to protect fiber during installation. A preconfigured small wall mount termination box is on one end of this FTTH patch cord. This termation box can be easily installed on the wall or desk and provide fast and securied connection with end-user's current network.
Fibre to the home (FTTH) is the installation and use of optical fibre to provide high-speed broadband access to individual buildings such as businesses or single-family units (SFUs) which are freestanding residential buildings, or multidwelling units (MDUs) such as apartment buildings. Before deploying a FTTH network, providers must first decide whether to use a splice, which is a permanent joint, or a connector, which can be easily mated and un-mated by hand. This is for both ends of the drop cable – the distribution point and at the home’s optical network terminal (ONT) or network interface device (NID). Both splices and connectors are widely used at the distribution point. At the ONT/NID, either a field terminated connector or a spliced-on factory-terminated connector can be used.
Specification
4 core customized fiber with 600um transfer tube are hold in 3.0mm cable jacket;
It is easy to identify fiber color with transfer buffer tube;
Novel flute design, easily strip and splice, simple installation and maintenance;
LC/APC connectors or other customized connectors are optional;
Paper spoon packing makes it easy to pull-out fiber cable during installation.
Low smoke, zero halogen or flame retardant sheath
Low cost;
High return loss;
Low insertion loss;
High strength aramid yarn strength member
Small outer diameter, light weight, flame-retardant
Suitable for installation, operation, and convenient for maintenance
Usage
Telecommunication Networks
CATV Networks
Data communications Networks
Local Area Networks
FTTx access Telecommunication netwroks;
Used on wall, floor or desk, Indoor
FTTH, FTTO, FTTD, etc
As building to building connecting cable
Technical Data
Construction of Optical Fiber Cable
| Model | GJPFJH | ||
| Fiber account | 4 (red, green, blue, yellow) | ||
| Cable | OD(mm) | 3.0±0.1 | |
| Thickness(mm) | 0.5± 0.05 | ||
| Material | LSZH | ||
| Buffer | OD(mm) | 0.60± 0.05 | |
| Color | Transparent | ||
| Material | PVC | ||
| Nominal weight(kg/km) | 13 | ||
| Cable Color | White or Customized | ||
| Strength Members | Aramid yarn | ||
| Environmental Protection | EU RoHS,REACH-SVHC, CHINA RoHS | ||
| Temperature range | Storage or transportation | -40~85℃ | |
| Operation | -20~70℃ | ||
| Cable attenuation | 1300nm | ≤1.5dB | |
| 850nm | ≤3.5dB | ||
| Jacket shrinkage | ≤5%(2 hours bake at 85℃±2℃) | ||
| Relatively humidity | 0~90 % | ||
Parameter for single mode pre-terminated 4 Core FTTH Fiber Optic patch cord
| Characteristics | Unit | Value/Performance |
| Insertion Loss (IL) | dB | ≤0.2 (typical); ≤0.3 (maximum) |
| Return Loss (RL) | dB | UPC≥50/APC≥60 typical |
| Operating Wavelength | nm | 1310 & 1550 |
| Mating | ≥500 times | |
| Tensile | N | 100 |
| RoHS Compliant | Yes | |
| Operating Temperature | ℃ | -20~+80 |
Optical Characteristics
| Fiber type | Attenuation | OFL bandwidth | Effective model bandwidth | 10G Ethenet | Min bend radius | |||
| SX | ||||||||
| Conditions | 1310/1550nm | 850/1300nm | 850/1300nm | 850nm | 850nm | / | ||
| Typical | Maximum | Typical | Maximum | |||||
| Unit | dB/km | dB/km | dB/km | dB/km | MHZ.km | MHZ.km | m | mm |
| G652D | 0.36/0.22 | 0.5/0.4 | --- | --- | --- | --- | --- | 16 |
| G657A1 | 0.36/0.22 | 0.5/0.4 | --- | --- | --- | --- | --- | 10 |
| G657A2 | 0.36/0.22 | 0.5/0.4 | --- | --- | --- | --- | --- | 7.5 |
| 50/125 | --- | --- | 3.0/1.0 | 3.5/1.5 | ≥500/500 | 30 | ||
| 62.5/125 | --- | --- | 3.0/1.0 | 3.5/1.5 | ≥200/500 | 30 | ||
| OM3 | --- | --- | 3.0/1.0 | 3.5/1.5 | ≥1500/500 | ≥2000 | ≤300 | 30 |
| OM4 | --- | --- | 3.0/1.0 | 3.5/1.5 | ≥3500/500 | ≥4700 | ≤550 | 30 |
| BI-OM3 | --- | --- | 3.0/1.0 | 3.5/1.5 | ≥1500/500 | ≥2000 | ≤300 | 7.5 |
| BI-OM4 | --- | --- | 3.0/1.0 | 3.5/1.5 | ≥3500/500 | ≥4700 | ≤550 | 7.5 |
Related Picture
Contact Person: Ms. Cherry Liu
Tel: 86-13798591226
Fax: 86-755-29407103
